Waterproof Buried Electric Dog Fence-Best Invisible Dog Fence

Specifications:

Product: Dog E-Fence Safe System Training Collar

Material: plastic and metal

Six characteristics：

1. Stealth environmental protection – the wires are buried in the ground, do not occupy the place, do not affect the appearance, give the dog more freedom.

2. Progressive tone stimulation – When the dog approaches the border, a warning sound is first heard. If you continue to approach, the system will make a slight impact.

3, pulse proportional stimulation – human high-tech design, the vibration intensity depends on the distance of the dog near the boundary line, the closer the dog is to the boundary line, the greater the vibration intensity.

Features:

1. Coverage Area Is 100% Customizable Up to 1.2 Acres 5,000 Sq. Ft. Simply Bury the Wire (Up To 1000 Feet Long) Around the Designated Area Along with the Included Perimeter Flags to Begin Training Your Dog.

2. Pet Collar Fits Dogs 8 Pounds and Up with Neck Sizes from 8 to 20 Inches (Small/Medium/Large/Extra Large Dogs).  Each collar will vary slightly insensitivity and the difference in range could be 6-12 inches but it will not affect how the system works.  Perform the “Short Loop Test” to determine if the transmitter needs to be replaced or if the boundary wire is broken.

3. Multiple Collar System Where 1 Transmitter Can Pair Up With Infinite Number of Receiver Collars.

4. Collar Receiver is Water Resistant and Rainproof. Receiver Delivers Safe Static Correction Shock Stimulation When Pet Strays Into Warning Zone.

How it works:

1) Wall-mounted transmitter: Transmitter is the central controller to the whole electronic system. Make sure the wire is set to a loop.

2) The receiver collar: Receiver (collar) will make a warning beep firstly and then continuous stimulation if your dog attempts to approach wire boundary.

3) How to install the system

*Design your containment area and calculate the amount of wire needed.

*Install the wall transmitter.

*Layout the perimeter wire.

*Connect the perimeter wire to the wall transmitter.

*Verify transmitter is functioning without a problem.

*Set up the receiver and then, test the containment system and adjust the field width.

*Install the boundary wire and training flags.

*Fit collars to your dogs and train your dogs.

Package Including:

• 1 * Indoor wall-mounted transmitter;

• 1 * Power plug;

• 1/ 2/3 * Adjustable receiver collar;

• 1/2/3* 6 Volt battery for collar;

• 1 * boundary wire of 300 metres;

• 2 * Extra metal contact points;

• 20 * Training flags;

• 1 * Test bulb;

• 4 * screws;

• 1 * User’s manual.